Toilets need to be cleaned weekly to prevent rust buildups and unsightly stains. While there are many commercial cleaners available in the market that can be used to clean toilets, you don’t necessarily have to invest in them. The reason is that you can clean and sanitize your toilet with just bleach. Below we have provided instructions on how to clean toilets with bleach.
How to Clean Toilet with Bleach – Instructions
· Gather the Materials
To clean your toilet, you will need a toilet brush, measuring cup, and bleach.
· Flush the Toilet
Flush the toilet before you pour bleach into it.
· Pour Bleach
Pour out a quarter cup of bleach into the toilet bowl. Don’t pour bleach into your toilet if it has rust stains because bleach will not remove these stains. To remove rust stains, use a combination of baking soda and vinegar. Let a mixture of baking soda and vinegar sit on the toilet bowl for 30 minutes and then remove the stains with a toilet brush. Flush the toilet to remove traces of rust.
· Scrub the Interior of the Bowl with the Toilet Brush
If there are no rust stains, pour bleach and then scrub the interior of the toilet bowl with the brush. Make sure to wear protective gloves and a mask because bleach can cause damage to your skin, eyes, and lungs. Also, keep your bathroom ventilated during the cleanup.
· Flush the Toilet
After you have scrubbed the toilet with the brush, flush it twice to remove any traces of bleach.
Deep Cleaning with Bleach
If your toilet has tough stains, you’ll have to deep-clean it with bleach. Follow the instructions below to deep-clean your toilet with bleach.
· Pour Bleach into the Toilet Bowl
Take a measuring cup and pour ¼ cup of bleach into your toilet bowl. Make sure to wear protective equipment to prevent the bleach from damaging your skin. Keep your bathroom ventilated while pouring the bleach.
· Let the Bleach Sit
Once you have poured the bleach, close the seat of the toilet and shut the door to prevent children and pets from using the toilet. Let the bleach sit throughout the day or overnight.
· Flush the toilet
Flush the toilet and lift the seat up to reveal a stain-free toilet.
· Repeat if Necessary
If you can still see stains on your toilet, repeat the process, allowing the bleach to sit for even longer.
How to Clean the Toilet with Bleach – FAQs
Q.1) How to sanitize the outside of a toilet?
You can sanitize the outside of your toilet bowl using diluted bleach. Put four to six tablespoons of bleach into a gallon of warm water. Pour this mixture into a spray bottle. Spray the diluted bleach solution onto the tank, outer bowel, pedestal, rim, top and bottom of the seat, and front and back of the lid. Now wipe down these surfaces with a damp sponge. Clean these areas with water to remove any lingering traces of bleach.
Q.2) What are some alternative toilet cleaning products?
If you don’t want to use bleach to clean your toilet, you can opt for these commercial cleaners:
No products found.
- Lysol Power Toilet Bowl Cleaner
- Clorox Automatic Toilet Bowl Cleaner Tablets with Bleach,
- Kaboom BowlBlaster 24oz. Toilet Bowl Cleaner Gel
- Lysol No Mess Automatic Toilet Bowl Cleaner
- Lime-A-Way Liquid Toilet Bowl Cleaner
Q.3) How to remove stains from toilet using vinegar and baking soda?
If you don’t want to use bleach or harsh chemical to clean your toilet, you could use vinegar and baking soda for removing stains from the toilet. Follow these instructions to clean your toilet with vinegar.
- Shut off the main valve to your toilet. You should be able to find this valve behind your toilet
- Using a bucket, remove as much water from the toilet bowl as possible
- Add vinegar to the bowl and then sprinkle some baking soda over it
- Using a nylon brush, spread the mixture of vinegar and baking soda around the toilet bowl and let it sit for 15 minutes
- Then scrub the stains with the toilet brush
- If the stains are not completely removed, add a small amount of lemon juice to the affected area and let it sit for 10 minutes
- Then scrub the bowl again to remove all stain
- Now turn the water on and flush. Your toilet should now be completely clean
We have provided instructions on how to clean toilets with bleach. Now, if you want to remove stains and clean your toilet bowl with bleach safely and effectively, follow the instructions discussed above. If you don’t want to use bleach, then opt for commercial cleaners. If your toilet has rust stains, then use vinegar and baking soda to clean it. Don’t use bleach on rust stains because doing this could make them even harder to remove.
We have answered some common questions that you might have about cleaning toilets. However, if you have any other questions, feel free to shoot a query our way. We’ll be happy to answer it for you.