How to Clean Slippery Shower Floor

As an Amazon affiliate, we earn from qualifying purchases.

Slippery shower floors are annoying and extremely dangerous. God forbid, but if you get caught up in an accident, the aftermath is something undesirable, no matter how you look at it. 

Here are the steps that you need to follow to get rid of the slippery substance affixed on the floor. Hope you are left with no questions on how to clean a slippery shower floor after reading our article.

How to clean a slippery shower floor

Things you will need to clean the floor

  1. Mop and Bucket
  2. Scrub Brush
  3. Dry mop

How to clean slippery shower floor – Step by step

Step – 1 – Make the cleaning solution

Mix some baking soda with white vinegar and pour this solution on the floor using a sponge. Let it rest for five to six minutes. 

Step – 2 – Scrubbing

After allowing the solution to rest on the floor use a scrub brush and scrub the floor. Do this until you get a clean floor.

A few tips for scrubbing

Tip 1: Scrub Brush

Use a scrub brush with a long staff instead of a hand brush for the floor. You can use the hand brush for tough stains. This will help you finish the task considerably faster. You will also feel less tired.

Tip 2: Taking care of the scrub brush

Wash the scrub brush right away so that the dirt doesn’t stick to it. Just put it under a high-pressure tap or twist it a bunch of times in a bucket filled with water. This amount of cleaning effort is enough when you are cleaning it right after you are finished using it.

Step – 3 – Rinsing

Rinse the floor with water after scrubbing. Just switch on the shower and wipe away the water. You will then be left with a clean floor. 

Step – 4 – Drying

Dry the floor using a dry mop. If you have a ceiling fan or an exhaust fan, then switch it on as well so that the floor would dry quicker. Leaving the floor wet might leave water spots. To avoid this we need to dry the floor.

Tips for mopping

Here are a few mopping tips to get you through the process by applying optimal efforts.

Tip 1: Mop Condition

The mop should be dry. If it is wet or even damp it defeats all the purpose of drying the floor in the first place 

Tip 2: Taking care of the mop

Keep the mop out in the sunlight for drying if possible. Sunlight tends to get rid of foul and damp smells as well. Make sure you dry the mop as well after drying the floor.

Tip 3: Floor condition while mopping

The floor is unlikely to be slippery at this stage. But it’s never futile to be cautious. Prevent yourself from all sorts of accidents.

Tip 4: Recommended mop

You can have a look at mops here. This is the best mop I came across. Its triangular build lets you get the dust and stains on corners and this is the most basic and impressive feature of this mop.

Sale
O-Cedar EasyWring Microfiber Spin Mop, Bucket Floor Cleaning System, Red, Gray
  • HANDS-FREE WRINGING: Our exclusive mop bucket design features a built-in wringer that allows for hands-free wringing while Splash Guard keeps water splash and spray inside the bucket when wringing or when transporting the bucket from room to room
  • MACHINE WASHABLE: The EasyWring Microfiber Mop Head is machine-washable and reusable! We recommend replacing the mop head refill every 3 months for optimal floor cleaning results
  • DEEP CLEANING MICROFIBER: O-Cedar's EasyWring Microfiber Spin Mop & Bucket Floor Cleaning System uses millions of strands of advanced microfiber to effectively capture dirt and grime with just plain water, eliminating the need for harsh chemicals. Safe for all hard flooring, including finished hardwood, wood, laminate, tile, vinyl and more.
  • REACHES IN CORNERS: Due to the patented triangle mop-head and ability to rotate 360 degrees, the EasyWring Mop can reach and clean deep into corners, under furniture, alongside baseboards, and between tile.
  • 1 REFILL = 3 MONTHS OF CLEANING: This offer includes 1 EasyWring Refill, and each EasyWring Microfiber Refill lasts up to 3 months! Save time and money with longer-lasting mop head replacements

Last update on 2022-06-23 / Affiliate links / Images from Amazon Product Advertising API

Slippery bathroom floor solutions

You can do a lot of things to make your bathroom floor an anti-skid zone. A few of these ways are illustrated below for your convenience.

Using a shower mat

It is the most common and approachable way to deal with a slippery floor. A shower mat is made up of materials like rubber, plastic, PVC or vinyl. All these materials have a non-slippery surface. Because of their design, they stick to the ground very well. 

There is something that might make you rethink installing one on your bathroom floor. Shower mats require regular cleaning. Over time, moisture accumulates beneath the shower mat making it slippery.

Febore buying one, make sure your floor is smooth. Because these will not stick on an uneven or rough floor.

I recommend using the gorilla shower mat. It has a very practical design and is machine washable. What could be better?

Sale
Gorilla Grip Patented Shower and Mat, 35x16, Machine Washable Bathtub Mats, Extra Large Tub Mat with Drain Holes and Suction Cups to Keep Floor Clean, Soft on Feet, Bathroom Accessories, Clear
  • Ultra Powerful Grip: featuring hundreds of suction cups to help secure the mat firmly in place on smooth, clean, non textured and non tiled surfaces, this mat is easy to install and a great choice for any home, gym, or spa
  • Patented Design for Maximum Comfort: the mat features a unique hexagon design with a soft, textured topside that will keep you and your whole family comfortable; perfect for taking baths or long showers; even soft and gentle enough for grooming your furry friends
  • Hundreds of Drainage Holes: constructed with hundreds of drainage holes throughout, the holes allow water and air to circulate which helps to reduce moisture and prevent buildup
  • Oversized Mat: extra large and generously sized mat is 35 by 16 inches; much larger than others; providing excellent coverage in tubs and showers
  • Machine Washable: yes, this mat can be washed in the washing machine; we recommend that you wash your mat before you use it the first time and rinse and dry it after each use; keeping your mat clean will help to uphold its fresh appearance and remove the oily and slippery build up that may occur from soaps

Last update on 2022-06-23 / Affiliate links / Images from Amazon Product Advertising API

Anti-slip adhesive treads

If you want something that camouflages with the background, this is what you are looking for. These are very easy to install as well. Make sure that you install it on an absolutely dry floor or else it will come off really quickly, making you think that it is a bother rather than a solution.

The upside is that you don’t need to clean them at all. If you think they are coming off or getting dirty you can just buy new ones and install them. 

Supkiir Bathtub Non Slip Stickers, 24 PCS Anti Slip Adhesive Shower Treads with Scraper for Bath, Tub, Shower, Pool, Stairs, Ladders, Kitchen, 15’’
  • - SAFETY NON SLIP TREAD: Made of durable and quality material. No peculiar smell and suitable size. Design for helping you to prevent slips and falls in most place like bathtubs, bathroom, kitchen, stairs, ladder, and etc.
  • - EASY TO INSTALL: Please clean and dry the smooth surface like before installing. Simple remove the paper to install and use the scraper to get any air out. It is best to complete the lamination at one time.
  • - NON RESIDUAL REMOVE: Back gluing tight with efficient anti slip protection and not abrasive. The grip is nice on the feet. Convenient cutting that meet your different needs. Non residual when removing.
  • - WIDE APPLICATION: This tread stickers will be great for bathtubs, bathroom, stairs, ladder or even if you have indoor pool or hot tub. Also can be use for kitchen for sinks, gas stoves, corners and other places.
  • - WHAT YOU GET: The package comes with 24 pieces clear stickers. Individual sticker size 15x0.78inches. We provide 180 days free replacement, if you have any question about our item please feel free to contact us.

Last update on 2022-06-23 / Affiliate links / Images from Amazon Product Advertising API

Applying an Anti-slip formula

Applying this will add a little more traction to the floor. This is more like a permanent solution to the slippery floor problem. Hence I recommend it personally. It lasts for a much longer time. You don’t have to take care if it is coming off or brewing mould either.

SlipDoctors Tub Grip Non Slip Clear Bathtub Coating I Perfect for Fiberglass & Acrylic Bathtubs and Showers to Prevent Slips & Falls. Barefoot Friendly Fine Texture. Roller Included!
  • ROLL-ON ANTI-SLIP COATING: The anti-slip coating by SlipDoctors is excellent for use on fiberglass, acrylic and other surfaces. This convenient coating is the perfect solution for wet or slippery areas such as bathtubs and showers, tile areas, concrete floors, gyms, spas and more.
  • PREVENTS SLIPS & FALLS: The perfect solution to help prevent injuries caused by slip and fall accidents. Our non-slip coating provides a clear, finely textured finish.
  • BAREFOOT FRIENDLY SURFACE: The durable textured surface created by Tub Grip is barefoot friendly and comfortable to stand or walk on.
  • EASY APPLICATION: One Tub Grip covers one standard size bathtub or shower. Porcelain tubs MUST be etched prior. Use the included roller to make application a breeze! Detailed instructions are included with every purchase. Tub Grip is low odor. Easy removal with lacquer thinner and a plastic scraper.
  • 100% MONEY BACK GUARANTEE: SlipDoctors is based in the USA and is the trusted leader in floor safety. We offer a 2-year warranty for all properly installed products and a 30-day money-back guarantee for unopened products.

Last update on 2022-06-23 / Affiliate links / Images from Amazon Product Advertising API

Follow the below steps for applying. Or else it might not be as effective as you expected it to be.

Step 1 –  Cleaning and drying the floor

Clean and let the floor dry completely. If the formula is applied on a wet floor it won’t stick to the ground well. Hence, it is crucial that the floor has no dust or mildew residue and is completely dried.

Step 2 – Marking

Mark the area where you want to increase floor traction. Use a broad cello tape and mark the area. It is easier to apply the formula if you have an outline.

Step 3 – Pouring and applying the formula

Pour the formula liquid and use a roller to apply the formula evenly. Roller will ensure that you don’t end up having an unevenly spread surface.

Step 4 – Waiting for it to dry

When you do something you want to try it out as soon as you can. Isn’t it? But be patient here. Let it dry completely. If you hastily tried something before it dries, all your hard work will go to waste.

You can see that when it dries, the milky colour disappears and the floor appears to be as it was. Apply it at the night and let it dry overnight. If there is a fan or exhaust fan in the washroom, switch it on for quick drying.

This is how you can apply the anti-skid formula. It surely is time-consuming and requires a bit more effort than the above-mentioned solutions but, it gives you a long term solution and requires a one-time effort. In my opinion, the wait and efforts are totally worth it.

Renovation 

If you are thinking about renovation, choose a tile that has a good grip and a non-slippery texture. This is the most durable solution to the problem that is how to make the tile shower floor less slippery.

This is an expensive way to solve the problem though. Go for this solution only if you had some prior plans to do so. Applying the formula was kind of a permanent solution but, replacing tiles is truly a permanent solution.

FAQs

Why is my shower floor slippery?

A shower floor is slippery basically due to moisture, soap and shampoo gathering on a smooth surface.

It is a common practice to wipe the floor dry before leaving but sometimes we skip it or forget to do it. Then this wet floor is also the root cause of many many accidents.

How to clean the shower floor naturally?

Cleaning with vinegar and baking soda is a natural way to clean the floor. When you pour it on the floor it reacts with the dirt and makes it so that it becomes easy to scrub and clean.

How to avoid slippery tiles in the bathroom?

Use any of the above-mentioned slippery bathroom floor solutions. You can also make some other affordable changes for avoiding any accidents. 

Install the storage unit in the washroom where you can easily approach the case. This will allow you to always be on your best footing. 

You can also install a steel grab bar. This always comes in handy. You can use it to hang your clothes as well. 

You can find interesting tips here to avoid slippery tiles in shower floor.

Wrap Up

Slippery floors are very dangerous and precautions must be taken for both safety and hygiene purposes. Just follow the steps mentioned above and you will have a clean floor in your bag.

Try to install something that will save you from the slippery floor. Choose anything that suits you at that time. Whether you want a quick solution or a permanent one, the choice is all yours.

I hope this article has answered all your questions on how to clean slippery shower floors. Protect yourself and your loved ones and keep the surface non-slippery. 

People Also Like:

Leave a Comment

Your email address will not be published.

Scroll to Top